How Much Does an Accessible Bathroom Remodel Cost in San Diego? (2026)

What a universal-design bathroom remodel costs in San Diego: job-cost and resale benchmarks, City permit fees, and what pushes a project into plan review.
Bathroom Remodeling · San Diego

How Much Does an Accessible Bathroom Remodel Cost in San Diego? (2026)

A curbless shower, a wider doorway or a comfort-height toilet can turn a standard bathroom remodel into a different permit and budget category. Here is what the independent cost data, the City’s own fee schedules and California contractor law actually say.

Eco Home BuildersUpdated November 20268 min read
A fully remodeled primary bathroom in San Diego with a walk-in shower and vanity
A finished bathroom remodel in San Diego. Accessible, or “universal design,” features add cost in specific, predictable places.

Key takeaways

  • Job cost benchmark: Pacific-region universal design bathroom remodels averaged $45,921 in job cost in the 2025 Cost vs. Value Report — above a midrange remodel’s $27,710 and below an upscale remodel’s $86,863.
  • Resale impact: the same report tracked $26,069 in added resale value for universal design work, a 56.8% cost-recouped rate.
  • Permit fee fork: a no-plan bathroom remodel carries a $440.82 Simple Permit-MEP fee, but removing a shower curb, widening a doorway or relocating a fixture pushes the project into full plan review with its own fee schedule.
  • Older-home add-on: San Diego homes built before 1978 carry a $58 Lead Hazard Prevention Fee on top of standard permit fees — relevant to many long-time homeowners remodeling to age in place.
  • Contract protection: California law caps a contractor’s down payment at $1,000 or 10% of the contract price, whichever is less, on any home improvement project.

1. What an Accessible Bathroom Remodel Costs in San Diego

The only independently audited, San Diego-relevant benchmark for this project type comes from the 2025 Cost vs. Value Report, which JLC and Zonda publish annually for nine U.S. regions, including the Pacific region that covers California. Their “Bath Remodel – Universal Design” category tracked an average job cost of $45,921 and an average resale value add of $26,069, for a cost-recouped rate of 56.8%.

That sits between the report’s midrange bathroom remodel ($27,710 job cost) and its upscale bathroom remodel ($86,863 job cost). Universal design work isn’t automatically the cheapest or most expensive path — it depends on which accessible features you add and whether they touch the room’s framing or plumbing layout.

2025 Cost vs. Value Report, Pacific region. Source: JLC / Zonda.
Bathroom remodel scope Job cost Resale value Cost recouped
Midrange $27,710 $25,217 91%
Universal Design $45,921 $26,069 56.8%
Upscale $86,863 $38,654 44.5%

2. What Makes a Remodel “Accessible” or “Universal Design”

“Universal design” is the industry term for features that work for homeowners of any age or mobility level, not just people with a diagnosed need. In a bathroom, that typically means a curbless or low-threshold shower, a wider doorway, blocking inside the wall for future grab bars, a comfort-height toilet, lever-style door and faucet handles, and slip-resistant flooring.

None of that requires a medical referral or a special permit category. It’s a design decision homeowners make, often while planning to stay in their current home long-term. San Diego’s permit system treats the work the same way it treats any other remodel: through the standard Building, Mechanical, Electrical and Plumbing permit types, based on the actual scope of work being done.

A curbless, zero-threshold walk-in shower with a built-in bench
A curbless shower is one of the most common accessibility upgrades in a bathroom remodel, and one of the most likely to require plan review.

3. Why These Features Cost More Than a Standard Remodel

A curbless shower pan usually means lowering or re-sloping the subfloor so water drains without a curb to stop it — framing and plumbing work that a simple tile-and-fixture swap doesn’t need. Widening a doorway can mean moving a stud wall. Relocating a toilet or shower drain to open up turning space means moving a plumbing fixture, not just replacing one.

Each of those is a meaningful line item on its own, and each one also changes which permit path the project qualifies for — which is where a second layer of cost shows up.

$440.82
no-plan permit fee for a kitchen or bathroom remodel with no structural or fixture changes (City of San Diego, Information Bulletin 103, 2026)
56.8%
of universal design bathroom remodel job cost recouped at resale, Pacific region (JLC / Zonda, 2025)

4. Permit Fees: No-Plan vs. Plan-Check

The City of San Diego offers a no-plan “Simple Permit-MEP” for a kitchen or bathroom remodel that doesn’t touch structural elements, wall framing or exterior walls, and doesn’t add plumbing fixtures or gas appliances. That combination mechanical, electrical and plumbing permit costs $440.82 per dwelling unit.

The moment a bathroom remodel adds a fixture, moves a wall, or needs new framing — which describes most curbless showers and widened doorways — it no longer qualifies for that no-plan fee. It moves into the City’s standard residential addition/remodel plan-check and inspection schedule instead.

City of San Diego permit fees, City of San Diego Information Bulletins 103 and 501, 2026.
Permit path What qualifies Fee
No-plan Simple Permit-MEP No framing, structural or fixture-count changes $440.82 per unit
Plan check (Res-SDU/DUP Add/Remodel) Framing, wall or fixture-location changes $3,512.92 base + $6.98 per 500 sq ft
Inspection (Res-SDU/DUP Add/Remodel) Companion inspection fee for the plan-check path $2,228.29 base + $4.46 per 500 sq ft
  • A dedicated exhaust fan added or relocated during the remodel carries its own $105.98 mechanical permit fee for the first unit.
  • New or relocated bathroom circuits fall under the electrical fee table at $176.57 for the first five circuits.
  • Projects that use plans or drawings for review also pay a flat $12.16 mapping fee.

5. Extra Costs in Homes Built Before 1978

Accessible bathroom remodels are disproportionately common in long-owned homes, where a homeowner is planning to stay rather than sell. If that home was built before 1978, the City’s building permit fee schedule adds a $58 Lead Hazard Prevention Fee on top of the standard plan-check and inspection fees above.

That fee funds lead-safe work practice compliance checks during demolition and surface disturbance — relevant to almost any bathroom remodel in an older home, since removing tile, cutting into a subfloor or reframing a doorway disturbs painted surfaces.

The one thing to plan around

If your project includes a curbless shower, a widened doorway, a relocated toilet or drain, or any new wall framing, budget for the plan-check path, not the $440.82 no-plan fee. Those are exactly the features that define a universal design remodel, and exactly the changes San Diego’s Information Bulletin 103 disqualifies from the no-plan permit.

6. Your Legal Protections When Hiring a Contractor

Whatever permit path your project takes, California law protects you the same way on any home improvement contract over $500. The Contractors State License Board requires a written, fixed-price contract and limits what a licensed contractor can collect before work starts.

California home improvement contract rules. Source: Contractors State License Board (CSLB).
Protection What it means
Written contract Required for home improvement projects; verbal agreements aren’t enforceable the same way.
Down payment cap No more than $1,000 or 10% of the contract price, whichever is less.
Fixed price The contract should state a fixed total, not an open-ended estimate.

Before signing, verify the contractor’s license is active through the CSLB’s License Check tool. A remodel that involves wall framing, drain relocation and electrical work, like most universal design bathrooms, is exactly the kind of multi-trade project where an unlicensed operator creates the most risk.

7. How This Compares to a Standard Bathroom Remodel

If your plans don’t include curbless showers, doorway widening or fixture relocation, the cost and permit path look like any other bathroom project. For that baseline, see our bathroom remodel cost guide and bathroom remodel permit guide. For how either scope affects your home’s resale value, our kitchen and bathroom remodel ROI breakdown covers the same Cost vs. Value data from a resale-first angle.

The practical difference with a universal design remodel is that the accessible features themselves — not the finishes around them — are usually what decides your permit path and final cost.

A remodeled bathroom vanity with a framed mirror
Finish choices layer on top of the accessibility features; both affect the final number.
How much does an accessible bathroom remodel cost in San Diego?

The 2025 Cost vs. Value Report put the Pacific-region average job cost for a universal design bathroom remodel at $45,921, with wide variation depending on which accessible features are included and whether they require moving walls or plumbing.

Is there a special permit for an accessible or universal design bathroom?

No. San Diego doesn’t have a separate permit category for accessible or universal design features. These projects go through the same Building, Mechanical, Electrical and Plumbing permits as any other remodel, based on the actual scope of work.

Do I need a permit for a curbless shower or a wider doorway?

Yes. Both typically involve wall framing, subfloor changes or fixture relocation, which disqualifies the project from the City’s $440.82 no-plan Simple Permit-MEP fee and moves it into full plan check and inspection instead.

Does a universal design bathroom remodel add resale value?

The same 2025 report tracked $26,069 in added resale value against the $45,921 average job cost, a 56.8% cost-recouped rate — lower than a midrange remodel’s 91%, but the comparison isn’t apples to apples since the two projects include different work.

What’s the cost difference between a midrange and a universal design bathroom remodel?

The 2025 report’s Pacific-region averages were $27,710 for a midrange remodel versus $45,921 for universal design, a difference largely driven by the structural and plumbing work behind accessible features.

Are there extra fees for remodeling an older San Diego home?

Yes. Homes built before 1978 carry a $58 Lead Hazard Prevention Fee on top of standard building permit fees, on top of the plan-check and inspection fees that apply to the remodel itself.

What should be in my bathroom remodel contract?

California requires a written, fixed-price home improvement contract and caps the contractor’s down payment at $1,000 or 10% of the contract price, whichever is less. Confirm the contractor’s license is active before signing.

Planning an accessible bathroom remodel?

Eco Home Builders handles design, permitting and construction for bathroom remodels across San Diego and Orange County, including universal design and aging-in-place projects.

Schedule a consultation

Sources

  1. City of San Diego, Development Services Department, Information Bulletin 103, Fee Schedule for Mechanical, Electrical, Plumbing/Gas Permits (May 2026).
  2. City of San Diego, Development Services Department, Information Bulletin 501, Fee Schedule for Construction Permits-Structures (August 2026).
  3. City of San Diego, Development Services Department, Permits overview (Building, Mechanical, Electrical and Plumbing permit types).
  4. JLC and Zonda, 2025 Cost vs. Value Report, Pacific Region.
  5. Contractors State License Board, consumer guidance on home improvement contracts and payment limits.

Cost and resale figures above are third-party market benchmarks from the Cost vs. Value Report’s Pacific region, not an Eco Home Builders quote. Your actual cost depends on your home’s layout, condition and the finishes you choose. Permit fees are current as of the City of San Diego bulletins cited above and are subject to change.

More Blog